Provide severe-duty lubrication with industrial-strength greases. No matter your industry or need, Molykote™ brand industrial greases are made to withstand severe-duty conditions. With a full range of high-performance greases – solid to semisolid materials with a lubricating fluid, thickening agent and additives.
Sparkplug Boots Low-consistency silicone compound Molykote® G-5008 Dielectric Grease General-purpose silicone compound Dow Corning® 111 Compound Starter Motors Planetary gear lubricant Molykote® 7514 Grease, G-1021 Spline shaft lubricant Molykote® Q5-7455 Grease, G-1021 Starter motor clutch lubricant Molykote® 7325 Grease
MOLYKOTE(R) YM-102 GREASE 6 of 6 16. OTHER INFORMATION This product safety data sheet was prepared in compliance with Commission Directive 91/155/EEC, 67/548/EEC and 1999/45/EC as well as their relevant amendements, on the approximation of laws, regulations and administrative provisions
DOW CORNING CORPORATION Material Safety Data Sheet Page: 6 of 7 Version: 2.1 Revision Date: 2012/08/28 MOLYKOTE(R) G-1021 SYNTHETIC AUTOMOTIVE GREASE DOT Road Shipment Information (49 CFR 172.101) Not subject to DOT. Ocean Shipment (IMDG) Not subject to IMDG code. Air Shipment (IATA) Not subject to IATA regulations.
NLGI Grade 2 PAO based grease with a lithium thickener. Offering a low coefficient of friction commonly used in applications where friction is needed.
Ellsworth Adhesives offers a comprehensive line of Dow MOLYKOTE™ Silicone lubricants, pastes, greases, and anti-seize compounds. These products are used to improve performance and longevity by providing excellent resistance against extreme temperatures, degradation, oxidation, wear, and corrosion.
® G-1021 Grease Synthetic-oil-based grease for extremely low startup and running frictional resistance Molykote® 3400A Anti-Friction Coating Heat-cured dry-film lubricant with excellent adhesion, corrosion protection and low friction Molykote® 33L Extreme Low Temperature Grease Silicone-based grease with excellent low-temperature resistance ...
Molykote G-1502FM Water Resistant Grease – Tacky The Molykote G-1502FM Synthetic Bearing and Gear Grease is designed to lubricate mechanical equipment operating under heavy water exposure.The Molykote G-1502 FM grease which is both water resistant and corrosion resistant is suited for open gears grease lubrication and water spray-off grease lubrication.
Molykote G-1021 Grease is designed for the long-term lubrication of metal/plastic, and plastic/plastic combinations where extremely low start-up and running frictional resistance at low temperatures is required. HOW TO USE Apply to clean, dry substrates using conventional grease application methods, e.g., brush, grease gun or
Molykote G-N Plus paste is a solid lubricant paste designed for the assembly and running-in of metal components. This specialty lubricant has a service temperature range of -25°C to +450°C MolykoteG-N Plus Paste100g Brand Type Size Material...
MOLYKOTE® YM-102 Grease with solid lubricants Specialty Lubricants Product Information ... • Heavy duty grease for plastic-to-plastic and plasticto-metal pairs at low to moderate speeds to high loads (e.g. highly stressed plastic gears in cars and in audio-video units). Color Yellow Consistency, density, viscosity
Molykote® G-1021 Grease: Synthetic-oil-based grease for extremely low startup and running frictional resistance: Molykote® 3400A Anti-Friction Coating: Heat-cured dry-film lubricant with excellent adhesion, corrosion protection and low friction: Molykote® 33L Extreme Low Temperature Grease: Silicone-based grease with excellent low ...
Molykote™ G-1021 Synthetic Automotive Grease. Molykote G-1021 Automotive Grease is designed for the long-term lubrication of metal/plastic, and plastic/plastic combinations where extremely low start-up and running frictional resistance at low temperatures is required.